Economical and Versatile
Outstanding Quality
Easy To Install
Easy to Use
Network Health and Management
Glitch-Free Redundancy
Unicast or Multicast
Fully Integrated with Windows and Mac OS X

Complete commentary functionality and 4W in a small belt pack format
Main mic/line input is electronically balanced on XLR with adjustable gain control
Input is switchable from line, mic, or mic + 48v phantom power
Low noise, high headroom mic amplifier
48kHz 24bit A/D converter
Headphone output on 6.35mm jack socket
Two outputs: one for main programme audio, one for talk back circuit, are both on the single RJ45/CAT5 network audio connection
Independently configurable buttons for both outputs using Config+: latching, momentary or lazy
Two inputs for headphone monitoring from network audio connection, both with adjustable level
Headphone inputs have left/both/right switching
Glensound intelligent headphone amp provides correct output levels into low or high impedance headphones and can also correctly drive mono earpieces with mono jack plugs.
Belt clip
Powered via PoE, or via external 12v DC
Maximum Dimensions (excluding belt clip): 153 mm x 104 mm x 43mm
Weight: 420g

Inputs
The main input is switchable between mic, mic+48v phantom power, and line. The input has an adjustable gain control to meet a wide range of dynamic, condenser, and ribbon microphones. The input passes through a broadcast quality dsp controlled compressor/limiter circuit prior to the A/D converters to maximize headroom and designed to manage the peaks of excited commentary. The A/D converters are full broadcast spec low noise, 48K 24bit designed for on air use.

Outputs/Talkback
There are two output circuits. One is used as the main programme audio, the other as a talkback circuit. There are separate button controls for each of these using Config+. They can each can be independently configured for latching or momentary, with the programme button also having a 'cough' feature. All talkback I/O connections are via the RJ45/CAT5 Dante network audio connection.

Monitoring
There are two monitoring inputs each with independent level control. Each of these inputs can be switched from the left ear, right ear, or both ears to the stereo headphone amplifier. The headphone amplifier is our high performance intelligent circuit which automatically adjusts its output level for high or low impedance headphones and can also drive mono earpieces and headphones.

There are 2 off 4 LED level meters both indicating -12 to +6 dB. One LED meter is located on the front panel to enable easy visualisation of the audio levels if the VITA is being used as a table top device and the other meter is located on the top panel facing the operator when used by its beltclip.

Power
Via PoE on the network connection, or via an external DC power supply.

The VITA is often used as a remote link to the main commentary unit. It is favoured by pitch side interviewers, and is popular in combinations with wireless systems.

MIC INPUT GAIN RANGE
+/-15dB

DYNAMIC MIC LINE UP
-58dBu

MIC + PHANTOM POWERT LINE UP
-42dBu

LINE INPUT LINE UP
0dBu (Gain range +/-15dB)

EQUIVALENT INPUT NOISE
124dBu (22-22KHz RMS gain @ max) Input terminated with 300 Ohms

FREQUENCY REPONSE (Mic-Line)
MIC: >+/-0.25dB 50Hz to 22kHz (-2dB @ 25Hz)
Line: >-0.1dB 22Hz to 22kHz

PHANTOM POWER
48 Volt Phantom power

MAXIMUM INPUT BEFORE CLIPPING
Dynamic MIC: -2dBu
Mic + 48V Phantom: +12dBu
Line: +18dBu

THD+NOISE (Ref +8dBu)
100Hz = 0.016%
1kHz = 0.012%
10kHz = 0.011%

PPM METERS
4 x LEDS (–12,-6,0,+6 dBu with reference to programme out)

HEADPHONE IMPEDANCE
32 - 1000 Ohms
Auto output level to match impedance

MAXIMUM HEADPHONE OUTPUT LEVEL
+15.8dB into 600 Ohms

HEADPHONE FREQUENCY RESPONSE
>0-.1dB 22Hz to 22kHz

HEADPHONE NOISE
-74dB @ lineup (residual noise)

HEADPHONE THD + NOISE (Ref +8dBu)
0.008% @ 1kHz

HEADPHONE VOLUME POT RANGE
Default: +10dB to Off
Optional configuration via App: +10dB to -20dB

DANTE NETWORK AUDIO CONNECTION
Frequency: 48 kHz
Resolution: 24 bit
CAT5 on an RJ45 connection. Two send channels and two receive channels.

REMOTE CONTROL APPLICATION
Windows 10 direct install application (Not downloaded from app store)

POWER
External: 9 to 15V @ < 80Ma 2.5 mm Jack (inner positive) or via PoE on CAT5 connection

OVERALL SIZE
43 x 153 x 103 mm (H x W x D)

UNIT WEIGHT
420 Grams

MECHANICS
All aluminium construction, anodised and laser etched panels, powder coated sides

INCLUDED ITEMS
Handbook A5 (Download also available)
2 metre RJ45 cable
Beltclip (Fitted)

OPTIONAL ITEM
Switch mode power supply terminated with IEC plug